SSC-156-32
SNAP-TOP® Standoffs - Types SSA, SSC, SSS - Unified
Part Aliases: Penn Engineering 106900259 Penn Engineering 90-10918-07
PEM SNAP-TOP® Standoffs (Types SSA, SSS, SSC) are designed for permanent installation into metal panels or PC boards.These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using any standard press.
Product Category: | |
Manufacturer: | Penn Engineering |
Manufacturer Part Number: | Penn Engineering SSC-156-32 |
Material: | 400 Series Stainless Steel |
Finish/Coating: | Passivated |
Animation: | View Animation |
Part Aliases: | 106900259 90-10918-07 |
SKU: | PEMSSC-156-32 |
Anvil Hole Diameter: | .216 - .219 |
Panel 1 (Bottom) Hardness Max.: | HRB 70 / HB 125 |
Panel 1 (Bottom) Location Tolerance Max.: | ±.005 in |
Panel 1 (Bottom) Thickness Min.: | .040 in |
Panel 1 Material: | Metal |
Panel 2 (Top) Hardness Max.: | No limit |
Panel 2 (Top) Material: | PC Board or Metal |
B ± .005: | .188 in |
C Max.: | .212 in |
H ± .005: | .250 in |
L - Length ± .005: | 1.00 in |
P ± .005: | .141 in |
Panel 1 (Bottom) Edge Distance C1 Min.: | .260 in |
Panel 1 (Bottom) Mounting Hole B + .003 - .000: | .213 in |
Panel 2 (Top) Edge Distance C2 Min.: | .100 in |
Panel 2 (Top) Thickness Range: | .040 to .070 in |
Environmental Initiative Details
Environmental Initiative: | RoHS |
---|---|
Compliant: | Unknown |
Date of this Information: | Unknown |
Notes: |