FHS-632-12
Self-Clinching Threaded Studs - Type FH/FHS/FHA - Unified
Part Aliases: Penn Engineering 106000840 Penn Engineering 90-07167-00
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.FH (flush-head) studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order.Flush-head in designated minimum sheet thickness or greater.Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 80 or less and HB (Hardness Brinell) 150 or less.Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” scale) 50 or less and HB (Hardness Brinell) 82 or less.
Product Category: | |
Manufacturer: | Penn Engineering |
Manufacturer Part Number: | Penn Engineering FHS-632-12 |
Thread Size: | 6-32 |
Material: | 300 Series Stainless Steel |
Finish/Coating: | Passivated |
Animation: | View Animation |
Part Aliases: | 106000840 90-07167-00 |
SKU: | PEMFHS-632-12 |
For Use in Sheet Hardness: | HRB 70 / HB 125 or Less |
Length Code: | 12 |
Material Code: | S |
Max. Hole in Attached Parts: | .160 in |
Min. Sheet Thickness: | .040 in |
Thread Code: | 632 |
H ± .015: | .206 in |
Hole Size in Sheet + .003 - .000: | .137 in |
L - Length ± .015: | .750 in |
Min. Dist. Hole C/L to Edge: | .250 in |
S Max.: | .090 in |
Environmental Initiative Details
Environmental Initiative: | RoHS |
---|---|
Compliant: | Unknown |
Date of this Information: | Unknown |
Notes: |