FHLS-M4-10
Low-Displacement Head Studs - Types FHL, FHLS - Metric
Our PEM® self-clinching studs are designed for easy installation in sheets, simply placing them in pre-sized holes and pressing them in with a standard press. The flush low-displacement head (FHL) design allows for installation closer to the edge of the sheet without causing bulging, ideal for sheet thicknesses of 1.00 mm and greater. These studs provide high torque-out and pushout resistances, securely locking into place. Made of 300 series stainless steel with a passivated finish, they are recommended for use in steel or aluminum sheets with specific hardness levels. Watch our animation for a visual guide on installation. Rest assured, they are RoHS compliant for environmental responsibility.
| Product Category: | |
| Manufacturer: | Penn Engineering |
| Manufacturer Part Number: | Penn Engineering FHLS-M4-10 |
| Thread Size: | M4 x 0.7 |
| Material: | 300 Series Stainless Steel |
| Finish/Coating: | Passivated |
| Animation: | View Animation |
| SKU: | PEMFHLS-M4-10 |
| For Use in Sheet Hardness: | HRB 70 / HB 125 or Less |
| Length Code: | 10 |
| Material Code: | S |
| Max. Hole in Attached Parts: | 4.40 mm |
| Min. Sheet Thickness: | 1 mm |
| Thread Code: | M4 |
| H ± 0.4: | 4.65 mm |
| Hole Size in Sheet + 0.08: | 4 mm |
| L - Length ± 0.4: | 10 mm |
| Min. Dist. Hole C/L to Edge: | 4.3 mm |
| S Max.: | 2.4 mm |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
