TFHS-M4-12
Non-Flush Studs - Types TFH, TFHS - Metric
Our PEM® self-clinching studs are designed for easy installation in thin sheets as minimal as 0.51mm thick, offering high torque-out and pushout resistances. With a non-flush TFH design, they securely lock into place with the stud head projecting above the surface by approximately 0.64mm. Crafted from 300 Series Stainless Steel and passivated for enhanced durability, these studs are suitable for use in steel or aluminum sheets with specific hardness levels. Whether you opt for Type TFH or TFHS, rest assured of reliable fastening solutions in various industrial applications.
| Product Category: | |
| Manufacturer: | Penn Engineering |
| Manufacturer Part Number: | Penn Engineering TFHS-M4-12 |
| Thread Size: | M4 x 0.7 |
| Material: | 300 Series Stainless Steel |
| Finish/Coating: | Passivated |
| SKU: | PEMTFHS-M4-12 |
| For Use in Sheet Hardness: | HRB 70 / HB 125 or Less |
| Length Code: | 12 |
| Material Code: | S |
| Max. Hole in Attached Parts: | 4.7 mm |
| Min. Sheet Thickness: | 0.51 mm |
| Thread Code: | M4 |
| H ± 0.4: | 5.80 mm |
| Hole Size in Sheet + 0.08: | 4 mm |
| L - Length ± 0.4: | 12 mm |
| Min. Dist. Hole C/L to Edge: | 7.2 mm |
| S Max.: | 1.80 mm |
| T Max.: | 0.64 mm |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
