TFHS-M3-20
Non-Flush Studs - Types TFH, TFHS - Metric
Easily secure studs in thin sheets with our PEM® Non-Flush Studs. Designed for use in steel or aluminum sheets as thin as 0.51mm, these TFH and TFHS studs offer high torque-out and pushout resistances. Installation is simple: place the stud in the designated hole and press with a standard tool. The TFH stud sits slightly above the surface at 0.64mm, providing a reliable fastening solution for various applications. Crafted from durable 300 Series Stainless Steel with a Passivated finish, these studs ensure long-lasting performance while complying with RoHS standards. Perfect for any assembly project requiring secure fastening in thin materials.
| Product Category: | |
| Manufacturer: | Penn Engineering |
| Manufacturer Part Number: | Penn Engineering TFHS-M3-20 |
| Thread Size: | M3 x 0.5 |
| Material: | 300 Series Stainless Steel |
| Finish/Coating: | Passivated |
| SKU: | PEMTFHS-M3-20 |
| For Use in Sheet Hardness: | HRB 70 / HB 125 or Less |
| Length Code: | 20 |
| Material Code: | S |
| Max. Hole in Attached Parts: | 3.3 mm |
| Min. Sheet Thickness: | 0.51 mm |
| Thread Code: | M3 |
| H ± 0.4: | 4.50 mm |
| Hole Size in Sheet + 0.08: | 3 mm |
| L - Length ± 0.4: | 20 mm |
| Min. Dist. Hole C/L to Edge: | 5.6 mm |
| S Max.: | 1.80 mm |
| T Max.: | 0.64 mm |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
