TFHS-256-4
Non-Flush Studs - Types TFH, TFHS - Unified
Introducing PEM® self-clinching studs, a reliable fastening solution for thin sheets as thin as .020 inches. Easily installed by squeezing into properly sized holes with a standard press, these studs provide high torque-out and pushout resistances. The TFH (non-flush) design, while not flush with the sheet surface, securely locks into place, projecting above by approximately .025 inches. Suitable for use in steel or aluminum sheets with specific hardness levels, these studs offer durability and ease of installation. Choose from Types TFH or TFHS in 300 Series Stainless Steel with a passivated finish for corrosion resistance, ensuring compliance with RoHS regulations. Upgrade your assembly process with these versatile and dependable fasteners.
Product Category: | |
Manufacturer: | Penn Engineering |
Manufacturer Part Number: | Penn Engineering TFHS-256-4 |
Thread Size: | 2-56 |
Material: | 300 Series Stainless Steel |
Finish/Coating: | Passivated |
SKU: | PEMTFHS-256-4 |
For Use in Sheet Hardness: | HRB 70 / HB 125 or Less |
Length Code: | 4 |
Material Code: | S |
Max. Hole in Attached Parts: | .105 in |
Min. Sheet Thickness: | .020 in |
Thread Code: | 256 |
H ± .015: | .141 in |
Hole Size in Sheet + .003 - .000: | .085 in |
L - Length ± .015: | .250 in |
Min. Dist. Hole C/L to Edge: | .187 in |
S Max.: | .070 in |
T Max.: | .025 in |
Environmental Initiative Details
Environmental Initiative: | RoHS |
---|---|
Compliant: | Unknown |
Date of this Information: | Unknown |
Notes: |