SSC-4MM-12
SNAP-TOP® Standoffs - Types SSA, SSC, SSS - Metric
Part Aliases: Penn Engineering 106900428
PEM SNAP-TOP® Standoffs (Types SSA, SSS, SSC) are designed for permanent installation into metal panels or PC boards.These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using any standard press.
| Product Category: | |
| Manufacturer: | Penn Engineering |
| Manufacturer Part Number: | Penn Engineering SSC-4MM-12 |
| Material: | 400 Series Stainless Steel |
| Finish/Coating: | Passivated |
| Animation: | View Animation |
| Part Aliases: | 106900428 |
| SKU: | PEMSSC-4MM-12 |
| Anvil Hole Diameter: | 5.49 - 5.56 |
| Panel 1 (Bottom) Thickness Min.: | 1.00 mm |
| Panel 1 (Bottom) Hardness Max.: | HRB 70 / HB 125 |
| Panel 1 Material: | Metal |
| Panel 2 (Top) Hardness Max.: | No limit |
| Panel 2 (Top) Material: | PC Board or Metal |
| B ± 0.13: | 4.78 mm |
| C Max.: | 5.39 mm |
| H ± 0.13: | 6.35 mm |
| L - Length ± 0.13: | 12 mm |
| P ± 0.13: | 3.58 mm |
| Panel 1 (Bottom) Edge Distance C1 Min.: | 6.60 mm |
| Panel 1 (Bottom) Mounting Hole B + 0.08: | 5.41 mm |
| Panel 2 (Top) Edge Distance C2 Min.: | 2.54 mm |
| Panel 2 (Top) Thickness Range: | 1.00 to 1.80 mm |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
