SMPS-M3
Nuts for Ultra-Thin Sheets - Type SMPS - Metric
Type SMPS self-clinching nuts are for installation into ultra-thin sheets. They feature a lower profile and can be mounted closer to the edge of a sheet than other self-clinching nuts.Installs into sheets as thin as 0.64 mm. Recommended for use in sheets HRB (Rockwell “B†scale) 70 or less and HB (Hardness Brinell) 125 or less.
Product Category: | |
Manufacturer: | Penn Engineering |
Manufacturer Part Number: | Penn Engineering SMPS-M3 |
Material: | 300 Series Stainless Steel |
Thread Size: | M3 x 0.5 |
Finish/Coating: | Passivated |
SKU: | PEMSMPS-M3 |
For Use in Sheet Hardness: | HRB 70 / HB 125 or Less |
Min. Sheet Thickness: | 0.64 mm |
Thread Code: | M3 |
A (Shank) Max.: | 0.61 mm |
C Max.: | 4.22 mm |
E ± 0.25: | 5.6 mm |
Hole Size in Sheet + 0.08: | 4.24 mm |
Min. Dist. Hole C/L to Edge: | 4.3 mm |
T ± 0.25: | 1.4 mm |
Environmental Initiative Details
Environmental Initiative: | RoHS |
---|---|
Compliant: | Unknown |
Date of this Information: | Unknown |
Notes: |