SH-M6-2X
Type SHâ„¢ Hard Panel Nuts - Metric
Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)Allows overall weight reduction for all vehiclesProvides lower installed costUnplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020â€/.0051 mmCompare to other thin sheet fastening devices:Addresses environmental concernsSmaller outer diameterLighter weightFlush on reverse side of panelClose to edge of panel mountingNo embossing requiredHardened nut material provides stronger thread strengthCan be installed automatically using press or in-die technology
| Product Category: | |
| Manufacturer: | Penn Engineering |
| Manufacturer Part Number: | Penn Engineering SH-M6-2X |
| Material: | Hardened Alloy Steel |
| SKU: | PEMSH-M6-2X |
| For Use in Sheet Hardness: | HRC 30 / HB 277 or Less |
| Min. Sheet Thickness: | 2.29 mm |
| Optional Finish: | Consult technical support for recommended optional finishes. |
| Shank Code: | 2 |
| Thread Code: | M6 |
| A (Shank) Max.: | 2.21 mm |
| C Max.: | 8.73 mm |
| E ± 0.25: | 11.18 mm |
| Hole Size in Sheet + 0.08: | 8.75 mm |
| Min. Dist. Hole C/L to Edge: | 8.6 mm |
| T ± 0.25: | 4.08 mm |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
