FHS-4MM-35
Self-Clinching Pins - Type FH, FHS, FHA - Metric
Install our self-clinching studs effortlessly by placing them in properly sized holes in sheets and squeezing into place with any standard press. The head of the stud embeds into the sheet, with displaced metal flowing smoothly around the ribs and into the annular groove for a flushhead assembly. This secure locking mechanism ensures high torque-out and pushout resistances. Available in aluminum, steel, or stainless steel, these FH (flush-head) studs are suitable for various sheet thicknesses and hardness levels. Choose Type FH for steel or aluminum sheets with specific hardness criteria, FHS for lower hardness levels, and FHA for aluminum sheets with further reduced hardness specifications. Trust in the durability and reliability of our self-clinching pins for your industrial needs.
| Product Category: | |
| Manufacturer: | Penn Engineering |
| Manufacturer Part Number: | Penn Engineering FHS-4MM-35 |
| Material: | 300 Series Stainless Steel |
| Finish/Coating: | Passivated |
| Animation: | View Animation |
| SKU: | PEMFHS-4MM-35 |
| For Use in Sheet Hardness: | HRB 70 / HB 125 or Less |
| Length Code: | 35 |
| Min. Sheet Thickness: | 1 mm |
| Pin Dia. Code: | 4 mm |
| H ± 0.4: | 6 mm |
| Hole Size in Sheet +0.08: | 4.10 mm |
| L - Length ± 0.4: | 35 mm |
| Min. Dist. Hole C/L to Edge: | 7.1 mm |
| P - Nominal Pin Diameter ± 0.05: | 4.00 mm |
| S Max.: | 2.30 mm |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
