FHLS-M4-12
Low-Displacement Head Studs - Types FHL, FHLS - Metric
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.FHL (flush low-displacement head) Studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge.Installs closer to the edge of a sheet than PEM Type FH/FHS studs without causing that edge to bulge.Flush-head for sheet thickness 1.00 mm and greater.Type FHL is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.Type FHLS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
Product Category: | |
Manufacturer: | Penn Engineering |
Manufacturer Part Number: | Penn Engineering FHLS-M4-12 |
Thread Size: | M4 x 0.7 |
Material: | 300 Series Stainless Steel |
Finish/Coating: | Passivated |
Animation: | View Animation |
SKU: | PEMFHLS-M4-12 |
For Use in Sheet Hardness: | HRB 70 / HB 125 or Less |
Length Code: | 12 |
Material Code: | S |
Max. Hole in Attached Parts: | 4.40 mm |
Min. Sheet Thickness: | 1 mm |
Thread Code: | M4 |
H ± 0.4: | 4.65 mm |
Hole Size in Sheet + 0.08: | 4 mm |
L - Length ± 0.4: | 12 mm |
Min. Dist. Hole C/L to Edge: | 4.3 mm |
S Max.: | 2.4 mm |
Environmental Initiative Details
Environmental Initiative: | RoHS |
---|---|
Compliant: | Unknown |
Date of this Information: | Unknown |
Notes: |