A4-M4-1
FLOATER, ASSY, 416 SS
These fasteners offer a versatile solution for securing load-bearing threads in thin sheets, accommodating up to 0.76mm of adjustment for hole misalignment. Featuring a self-clinching design, they facilitate quick and easy assembly by being pressed into prepared holes. The sheet remains flush on one side, ensuring a neat finish, while the fastener is securely locked in place. With threads extending fully into the retainer shank, they provide enhanced strength and support in assembly. Available in both non-locking and self-locking variants, they are suitable for use in stainless steel sheets as thin as 0.97mm with hardness up to HRB 88. Compliant with RoHS regulations, these fasteners are a reliable choice for various industrial applications.
| Product Category: | |
| Manufacturer: | Penn Engineering |
| Manufacturer Part Number: | Penn Engineering A4-M4-1 |
| SKU: | PEMA4-M4-1 |
| Float: | 0.38mm minimum, in all directions from center, 0.76mm total |
| For Use in Sheet Hardness: | HRB 88 / HB 183 or Less |
| Min. Sheet Thickness: | 0.97 mm |
| Shank Code: | 1 |
| Standard Finish - Retainer & Nut: | Passivated and/or tested per ASTM A380 |
| Thread Code: | M4 |
| A (Shank) Max.: | 0.97 mm |
| C Max.: | 9.33 mm |
| D Max.: | 9.28 mm |
| E ± 0.38: | 11.18 mm |
| Hole Size in Sheet + 0.08: | 9.35 mm |
| Min. Dist. Hole C/L to Edge: | 8.64 mm |
| T1 Max.: | 3.31 mm |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
