TFH-M5-20ZI
Non-Flush Studs - Types TFH, TFHS - Metric
Ensure compliance with RoHS standards with our Non-Flush Studs. Made of heat-treated carbon steel with a zinc plated finish, these studs provide high torque-out and pushout resistances when securely locked into sheets as thin as 0.51mm. Ideal for use in steel or aluminum sheets with specific hardness levels, the TFH and TFHS types offer reliable fastening solutions for various industrial applications. Install them easily by placing them in properly sized holes and squeezing into place with a standard press. The TFH type, with a protruding head, is suitable for situations where flush head studs are not required, ensuring a flushhead assembly and optimal performance. Trust in the durability and efficiency of our Non-Flush Studs for your assembly needs.
| Product Category: | |
| Manufacturer: | Penn Engineering |
| Manufacturer Part Number: | Penn Engineering TFH-M5-20ZI |
| Material: | Heat-Treated Carbon Steel |
| Finish/Coating: | Zinc Plated |
| SKU: | PEMTFH-M5-20ZI |
| For Use in Sheet Hardness: | HRB 80 / HB 150 or less |
| Length Code: | 20 |
| Max. Hole in Attached Parts: | 5.3 mm |
| Min. Sheet Thickness: | 0.51 mm |
| Thread Code: | M5 |
| H ± 0.4: | 6.4 mm |
| Hole Size in Sheet + 0.08: | 5 mm |
| L - Length ± 0.4: | 20 mm |
| Min. Dist. Hole C/L to Edge: | 7.2 mm |
| S Max.: | 2.30 mm |
| T Max.: | 0.64 mm |
Environmental Initiative Details
| Environmental Initiative: | RoHS |
|---|---|
| Compliant: | Unknown |
| Date of this Information: | Unknown |
| Notes: |
